About UsMarkets NewsExhibitionsContactJob OpportunitiesHome
|
||
| About UsMarkets NewsExhibitionsContactJob OpportunitiesHome |
|
|
| FLOOR CARE WITH KGS FLEXIS FM | |||
|
|
|||
|
Deep Cleaning |
|||
The KGS FLEXIS FM system could not be simpler! |
|
Deep Cleaning |
|
 |
1. After you clean the floor by your normal dry or wet method, install the coarse pad and work across the floor evenly with four or five passes for a light machine, less for heavier units. Scratches are removed or greatly reduced and that dull soiled surface is replaced by a smooth clean floor. |
 |
2. Do you want the fashionable, natural honed look? Change the pad to mediurn grade and work across the floor until the finish is even. Three or four passes should be enough to give a honed finish. |
 |
3. If a honed surface is less shiny than you would like, a glowing luster is also possible. Use the mediurn grade pad as described above, then move on up to the fine pad, work evenly across the floor until the required shine appears, a few passes will suffice. |
 |
4. Would you like to progress to a deep glossy shine? No problem!! Change to the very fine pad and repeat the process, the shine will appear very quickly. |
| N.B. The level of gloss which can be achieved is dependent on the machine you are using to undertake the job in the deep clean phase. In simple terms the heavier the pad pressure, and faster the pad speed of your machine, the greater the gloss you can produce. However, once the deep clean phase is complete, even the lightest auto scrubber, or slow speed single disc will maintain the shine during regular cleaning. In almost all cases stage 1 is best performed wet. Stages 2, 3, & 4 give the best results when performed dry. | |
| For more information: Write to floorfinishing@kgsdiamond.com or use the Inquiry Form under "Contact" |
|